SS SCAR Rid 0707 Stainless Steel Pickling Gel

Industrial usage for Passivation, Descaling and Cleaning of Stainless Steel Parts, Equipment and Systems.

DESCRIPTION

SS SCAR Rid 0707 is used to remove the black oxide marks and heat tint left during welding stainless steel. SS SCAR Rid 0707 removes all the contaminants from the metal weld surface giving it a clean and professional look. It can be applied on all types of stainless steel and nickel-chromium based superalloys (Inconel alloys) also.

PHYSICAL PROPERTIES

KEY FEATURES

• Quick Action.
• Bright shining surface.
• One step treatment.
• Can be used on vertical and overhead surfaces.
• Completely water rinsible.
• Convenient size packs – no wastage

DIRECTIONS FOR USE

• Clean the weld area carefully using a stainless-steel brush.
• Roll or shake the drum of SS SCAR Rid 0707 if possible, for 30 seconds prior to opening the container to ensure a smooth consistency, especially if the product has not been used for a long time.
• After welding, ensure the area to be pickled has sufficient time to cool below 40°C.
• Apply the SS SCAR Rid 0707 gel to the area to be pickled with the brush provided.
  DO NOT PICKLE IN DIRECT SUNLIGHT.
• Application times may vary depending on ambient temperatures, the grade of stainless, surface finish or the method of welding. On a hot-rolled surface, the pickling time may increase by 50%. MIG welds may require longer pickling times than those obtained using covered electrodes. Allow the pickling gel or solution sufficient time to react with the surface. With high ambient temperatures or when longer pickling times are required, it may be necessary to repeat the process. Do not allow the pickling agent to dry on the surface. Should the product dry on the surface wash down, dry and repeat the process.
• To clean, rinse the surface with clean potable water. The best results are obtained by the use of high-pressure water jet or similar. Ensure the pickle residues are not left on the surface. If the surface to be cleaned is in an environmentally sensitive area the bucket and rag method can be employed. Using a bucket of clean potable water wash and wipe the surface down with wet clean rags. Repeat to ensure the surface is clean and free of acids.

DO NOT OVER PICKLE – The best results are obtained by continuous visual inspection of the surface.

NOTE.

• Wear gloves and goggles; avoid spillage or splashes.
• Do not allow to come in contact with the body.
• If skin contact occurs, apply Calcium Gluconate gel.
• Avoid contact with eyes or breathing any vapor.
• Replace the lid on the container tightly and store upright in a cool dry area away from direct sunlight. Do not store or use below 5 oC.
• SS SCAR Rid 0707 has a recommended shelf life, in good storage conditions, of 2 years.

PACKAGE SIZES

SS SCAR Rid 0707 comes in an easy convenient size of 1kg packed in a plastic jar.

SAFETY PRECAUTIONS

Caution: This product contains Hydrofluoric Acid and Nitric Acid and is corrosive and poisonous.

• Wear appropriate clothing, i.e. rubber gloves, PVC apron/overalls, rubber boots, long sleeve shirt, and full-face shield or clear goggles.
• Do not use S-Weld Clean near open flames or cutting torches, since a hazardous flammable gas can be generated.
• Keep lid tightly closed when not in use. Store in a cool, dry spot away from direct sunlight.
• Keep out of reach of children. Refer to the Chemwit Contra Corrosions’ SS SCAR Rid 0707 Material Safety data sheet for further safety information.

Product Gallery